Configuration Via Bluetooth; Transferring The Configuration File - Honeywell STX Programming Manual

Commissioning
NOTE: Enable Show Passcode option to view the passcode you are entering.
5.4

Configuration via Bluetooth

This feature enables you to configure the panel via Bluetooth. You can send and receive
configuration file via Bluetooth between panel and PC tool/Mobile App.

5.4.1 Transferring the Configuration File

To transfer the configuration file from the mobile to the panel, follow the steps given below:
1. Connect the Bluetooth Dongle to the USB port in the panel and tap OK.
2. In the Commissioning screen, tap
ReferFigure 5.2 on page 16.
3. On the mobile, switch-on the Bluetooth and discover the HONBLEKIT2 connection.
4. Enter the passcode that is appearing in the panel in your mobile device.
27
Figure 5.19 Edit User Passcode
Figure 5.20 Bluetooth Detected
next to Configuration via Bluetooth option.