Recommended Installation Position; Light Conditions; Changing The Name Plate - Telecom Behnke myintercom One Instructions Manual

Instructions myintercom One
GB
GB
Introduction

1.4. Recommended installation position

Since the camera has a restricted angle of
view, the position at which the myintercom
video door intercom is installed is of decisive
importance. Accordingly, the camera should
be mounted at a height of approximately
155cm, depending on the local conditions. For
further details, please see the illustration.

1.5. Light conditions

To improve the image quality at night or in
poor light conditions, we recommend fitting
an outdoor light.
50 cm
30

1.6. Changing the name plate

Raise the name plate from the surface of the intercom
unit using a screwdriver
Slide labelled paper strip into the name plate
Push the name plate back into the opening in the
intercom unit
www.behnke-online.de