Recommended Installation Position; Light Conditions; Changing The Name Plate - Telecom Behnke myintercom Instructions Manual

GB
Instructions for myintercom
Introduction

. . Recommended installation position

Since the camera has a restricted angle of
view, the position at which the myintercom
video door intercom is installed is of decisive
importance. Accordingly, the camera should
be mounted at a height of approximately
cm, depending on the local conditions. For
further details, please see the illustration.

. . Light conditions

To improve the image quality at night or in
poor light conditions, we recommend fitting
an outdoor light.
cm

. . Changing the name plate

Raise the name plate from the surface of the intercom
unit using a screwdriver
Slide labelled paper strip into the name plate
Push the name plate back into the opening in the
intercom unit