Chapter 2
Configuring RED Pack Parameters
2-16
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink Module User Guide, Version 2.0
Parameter
AAL5 packets from
Up-Link CPU dropped
for hardware error
AAL5 oversize packets
dropped
ATM cells out
For more information on RED Pack and how it can effect your
network, see
Appendix
To configure RED pack parameters:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure
3).
2. Click ATM in the Type column of the ATM Uplink module
you want to modify. The ATM Module Information dialog box
opens
(Figure
5).
3. Click Additional Configuration. The ATM Configuration
dialog box opens
Figure 14. ATM Configuration Dialog Box
Description
AAL5 frames transmitted by the uplink
CPU, but dropped for hardware error.
AAL5 frames dropped due to exceeding the
link Maximum Transmission Unit (MTU).
Total ATM cells transmitted on this port to
the ATM network.
A, RED Pack Overview.
(Figure
14).