4. Connect the cables
Connect PCs. servers, routers, work-
stations, and hubs
1. Connect the appropriate Ethernet con-
nection cable (not supplied) to a
10/100 Mbps port on the front panel
of the Avaya P120.
You can use standard RJ-45 connec-
tions. You must use CAT-5 cable for
100 Mbps operation.
2. Connect the other end of the cable to
the Ethernet port of the PC, server,
router, workstation, switch or hub.
3. Check that the appropriate link (LNK)
LEDs light up.
Connect the console cable
1.
Connect the supplied RJ-45 connector
to the connector marked "Console"
on the front panel of the Cajun P120.
2.
Connect the other end of the cable to
a terminal or PC with terminal emula-
tion software installed.