nedis HPBT5056GY Quick Start Manual page 6

•
Disconnect the product from the power source and other
equipment if problems occur.
•
This product is equipped with a non-removable internal
battery. Do not attempt to replace the battery yourself.
•
Do not short circuit.
•
Do not repair the product. If damaged, it must be properly
disposed of.
Pairing the earphones to a Bluetooth audio
source
1. Take the earphones out of the charging case. The earphones
switch on automatically.
4
Tap and hold both earphone touch controls A
seconds to manually switch on the earphones.
5
2. A
blinks red and blue to indicate pairing mode is active.
3. Enable Bluetooth on the device you want to pair the
earphones with.
4. Select "HPBT5056GY" from the list of available Bluetooth
devices on your device.
Charging the product
1. Plug the USB-C cable A
charging case.
2. Plug the other end of A
adapter.
3. Plug the power adapter into a power outlet.
4
The charging indicator LED A
progress of the battery.
4. Place the earphones into the respective slots A
close the lid A
4
The earphones and the charging case can charge
simultaneously.
4 The status indicator LED A
to indicate the earphones are charging.
Making phone calls
With the earphones connected to a mobile phone via
Bluetooth, phone calls will automatically be redirected to the
earphones.
• To answer an incoming call, tap A
• To reject an incoming call, tap and hold A
seconds.
• To end a call, tap A
Controlling the music
6
• Tap A or A
7
into the USB-C port A
7
into a computer or power
1
to charge the earphones.
5
6 9
or A
9
to play or pause the music.
6
4
indicates the charging
on the earphones burns red
6 9
or A
6
.
6 9
A
for 2
2
of the
3 8
A
and
.
9
or A
for 2