Lateral Run-Out Adjustment / Calibration - Pro-Cut X9D Technical Manual

TROUBLESHOOTING
LATERAL Run-out ADJUSTMENT
If the machine is having difficulty adjusting for lateral run-out, first assess the vehicle being serviced. If
lateral movement is rough or uneven due to damaged vehicle components, these components must be re-
paired or replaced before rotors are match-machined. It is also important that the machine be supported
by the trolley during adjustment.
CALIBRATION PROCEDURE
The Pro-Cut PFM X9D Rotor Matching System is calibrated with an acceptance
number from the factory. Normally, this will never need to be changed. Please
call Pro-Cut Service Department before attempting calibration procedure to
confirm that this is the problem.
PG / 800.543.6618
40