Set-Up Mode - Pro-Cut X9D Technical Manual

SET-UP MODE

SPINDLE MOTOR MUST BE OFF
Press the control knob to enter
Set-up mode.
Set-up Mode:
· Long Press > 3 seconds to enter set-up mode.
· Rotate to scroll through options and toggle
between choices within an option.
· Short press to select option or drill down to
another level.
· Long press to accept changes
Available Options in Order:
· Maintenance Alert Reset
· Unit >Inch/mm
· LRO .001 > Adjust
· Maintenance Alert >On/Off
· Maintenance Interval > up/down
· Reset Lathe >
WWW.PROCUTUSA.COM PG / 37