Kramer VIA GO2 User Manual page 32

Mirroring Android Devices Using Miracast
To mirror an Android device using Miracast:
1. In your Android device settings, open Wi-Fi Direct, Miracast, or ScreenCast.
Device options appear on your screen.
2. Click the Room Name of your VIA collaboration device.
A PIN code field appears (if Code was activated on your VIA device).
3. Enter the Code that appears on the main display and click Accept/Connect.
The name of your device appears on the main display and then your screen is
mirrored on the main display.
Mirroring with Extended Desktop
VIA GO² enables users to use the main display as an extension of their device desktop to
present content. The user's primary screen is not mirrored, allowing the user to keep the
content on their laptop display private while mirroring.
This feature is available on Windows client laptops only, after installation of the required
drivers. When using this feature for the first time, the system asks you to install the drivers.
Please accept and follow the on-screen instructions. Once the drivers are installed, reboot
your PC to enable the feature.
Mac users can use AirPlay to simulate the same behavior (see
iPhones Using iOS/OS X Airplay Service
VIA GO² – For User: Participating in a VIA Meeting
on page 26).
Kramer Electronics Ltd.
Mirroring Apple Laptops and
30