Kramer VIA GO2 Quick Start Manual

VIA GO2 Quick Start Guide
For Installer
This guide helps you install and configure your
Scan for full
manual
Go to
and check if firmware upgrades are available.
Step 1: Check what's in the box
VIA GO2 Collaboration Device
1 Power supply (12V DC) with adapters for US, UK, and EU

Step 2: Get to know your VIA GO2

# Feature
1 Micro SD Card Slot
2 Power Button with LED
3 USB 3.0 Connector
4 USB 2.0 Connector
5 Lock Opening
6 HDMI™ Connector
7 RJ-45 Connector
8 Power Connector

Step 3: Install VIA GO2

Place VIA GO2 on a flat surface, or mount on a wall or the back of a display using the included VESA mounting bracket:
1. Attach the VESA mounting bracket to
the back of the display with 4 screws.
VIA GO2 Quick Start
www.kramerav.com/downloads/VIA GO2
Function
Not in use.
Press to power ON or turn OFF the device.
Connect to a USB device, for example, a keyboard or mouse.
Connect to a USB device, for example, a keyboard or mouse.
Connect to a security locking cable.
Connect to an HDMI sink.
Connect to a LAN (default mode).
Connect to the 12V DC power supply.
2. Fasten two screws to the bottom of
VIA GO2.
VIA GO2 for the first time.
to download the latest user manual
1 VESA mounting bracket
1 VESA screw set
3. Insert the screws on the bottom of
VIA GO2
bracket.
2 9 0 0 - 3 0 1 3 4 7 QS
P/N:
1 Quick start guide
into the slots on the mounting
Rev: 2