Kramer VIA GO2 User Manual page 13

2. Click WiFi.
The WiFi tab appears.
3. Click the Switch On or Off Wifi switch.
The switch turns green and the WiFi settings appear.
4. Click AP Mode, and enter a new name in the SSID field and a new password or use the
default name and password.
5. Select Enable Internet if your
-OR-
Select Activate Standalone Wifi to create an autonomous network without Internet
access.
6. Click Apply.
The secure wireless guest access point is set up.
Connecting VIA GO² to Network Wirelessly
VIA GO² enables you to wirelessly connect your
main network.
To set up Client Wi-Fi mode:
1. Click VIA Management > Network Settings.
The Network Settings page appears
2. Click WiFi.
The WiFi tab appears
3. Click the Switch On or Off Wifi switch.
The switch turns green and the WiFi settings appear
VIA GO² – For Web Administrator: Configuring Settings – Embedded Web Pages
Figure 6: VIA Management > Network Settings Page > WiFi Tab
Figure 7: WiFi Settings Tab with Settings Showing
VIA GO²
(Figure 6).
device is connected to a network with internet.
VIA GO² device as a client device to your
(Figure 5).
(Figure
Kramer Electronics Ltd.
7).
11