Kramer VIA GO2 User Manual page 12

Changing Device IP Address
The default IP setting is DHCP that assigns an automatic IP address to your
This enables easy plug and play setup when connecting your
following explains how to change a static IP address.
When changing these settings, make sure they are correct. Incorrect values can cause a loss
of communication.
To change the IP address of your VIA GO² unit:
1. Click VIA Management > Network Settings.
The Network Settings page appears.
2. Under IP Configuration, select Static.
3. Under Network Information, change the IP settings.
4. Click Apply Settings.
The IP address of your
Setting Up Secure Wireless Guest Access Point
Using the built-in Wi-Fi module,
users to connect to your
not want to connect directly to your network.
To set up a secure wireless guest access point:
1. Click VIA Management > Network Settings.
The Network Settings page appears
VIA GO² – For Web Administrator: Configuring Settings – Embedded Web Pages
Figure 5: VIA Management > Network Settings Page
VIA GO² unit is changed.
VIA GO² enables you to set up a secure access point for
VIA GO² network. This setup is ideal for guest users whom you may
(Figure
VIA GO²
5).
Kramer Electronics Ltd.
VIA GO² device.
to the network. The
10