Kramer VIA GO2 User Manual page 15

Uploading SSL Certificate
VIA GO² enables you to upload a custom SSL certificate to better provide for the security needs of
your organization.
To prevent damage to the system, make sure you upload files that can be used by the
system. If you are unsure of how to use this feature, contact technical support.
For information on how to create a certificate, see Creating an SSL Certificate for VIA,
available at: www.kramerav.com/product/VIA
After obtaining your certificate, install it on your VIA device.
The uploaded files must stay in the format of "server.crt" & "server.key".
To upload an SSL certificate:
1. Click VIA Management > Global Settings on the navigation pane
The Global Settings page appears.
2. Click Upload Certificate.
The Upload Certificate tab appears.
Figure 10: VIA Management > Global Settings – Upload Certificate Tab
3. In Step 1, click Browse File to upload the web server certificate.
A file browser appears.
4. Open the relevant certificate file and click Upload.
5. In Step 2, click Browse File to upload the key file.
A file browser appears.
6. Open the relevant key file click Upload.
Do not upload the key file until the certificate file is finished uploading.
7. Restart your device.
The SSL certificate upload is completed.
VIA GO² – For Web Administrator: Configuring Settings – Embedded Web Pages
GO².
Kramer Electronics Ltd.
(Figure 4).
13