Maintenance - Honda HHTE38BE Owner's Manual

5. Align the notches of the spool from which the lines protrude with the eyelets in
the spool retainer and position the spool in the retainer (Fig. 22).
6. Holding the spool and spool retainer, grasp one end of the line and pull it to
release the line from the notch in the eyelet. Repeat with the other end (Fig. 23).
7. With the spool base facing downward, align the slots in the spool retainer with
the tabs on the spool base and press the retainer evenly down until it snaps
into place (Fig. 24).
NOTICE:
Make sure that the tabs on the spool base snap into place or the spool
will come out during operation.

MAINTENANCE

WARNING:
When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage. Inspect and maintain the
machine regularly. To ensure safety and reliability, all repairs should be performed
by a qualified service technician.
WARNING:
Battery tools do not have to be plugged into an electrical outlet;
therefore, they are always in operating condition. To prevent serious personal injury,
take extra precautions and care when performing maintenance, service or for
changing the cutting attachment or other attachments.
WARNING:
To prevent serious personal injury, remove the battery pack from
the tool before servicing, cleaning, changing add-on attachments or removing
material from the unit.
CLEANING THE UNIT
◾ ◾
Clean the unit using a damp cloth.
◾ ◾
Do not use any strong detergents on the plastic housing or the handle. They
can be damaged by certain aromatic oils, such as pine and lemon, and by
solvents such as kerosene. Moisture can also cause a shock hazard. Wipe off
any moisture with a soft dry cloth.
◾ ◾
Use a small brush or the air discharge of a small vacuum cleaner brush to
clean the air vents on the shaft.
◾ ◾
Keep the air vents free of obstructions.
CORDLESS LAWN TRIMMER — HHTE38BE
EN
31
EN