Honda HHTE38BE Owner's Manual page 26

Tips for best trimming results
EN
(Fig. 16)
◾ ◾
The correct angle for the cutting
attachment is parallel to the ground.
◾ ◾
This Lawn Trimmer allows you to
rest the bump knob on the ground for
operating more comfortably.
◾ ◾
Do not force the Lawn Trimmer.
Allow the very tip of the line to do
the cutting (especially along walls).
Cutting with more than the tip will reduce cutting efficiency and may overload
the motor.
◾ ◾
The cutting height is determined by the distance of the cutting line from the
lawn surface.
◾ ◾
Grass over 200 mm should be cut by working from top to the bottom in small
increments to avoid premature line wear or motor drag.
◾ ◾
Slowly move the Lawn Trimmer into and out of the area being cut, maintaining
the Lawn Trimmer at the desired cutting height. This can be either a forward
backward or side-to-side motion. Cutting shorter lengths produces best results.
◾ ◾
Trim only when grass and weeds are dry.
◾ ◾
Wire and picket fences can cause extra line wear or breakage. Stone and brick
walls, curbs, and wood may wear lines rapidly.
◾ ◾
Avoid trees and shrubs. Tree bark, wood moldings, siding, and fence posts can
easily be damaged by the lines.
26
EN
CORDLESS LAWN TRIMMER — HHTE38BE
16
Dangerous
cutting area
Direction of
rotation
Best cutting
area