Page 2
JBL dealer about your installation options. I. PRODUCT DESCRIPTION JBL BassPro Go is a powered subwoofer designed to easily mount and charge in any vehicle. It acts as a subwoofer or a full-range speaker in the vehicle; and, with its quick-disconnect feature, becomes a portable Bluetooth speaker.
Page 3
B. Mounting the speaker in the dock D. Power/Protect indicators when connected to the vehicle 1. Pull the handle out. The power button on the control panel indicates the speaker’s modes of operation. Pull Illumination color Mode of operation White Subwoofer mode (in vehicle only) Green Full-range mode...
Setting First LED color JBL BASSPRO GO Input level (docked in vehicle Blue only) Crossover (docked in vehicle in woofer mode only) Gain (docked in vehicle only) Green Bass boost Orange Phase (docked in vehicle in Teal woofer mode only) B.
Page 5
180° G. Using the speaker in Full-Range Mode in vehicle Find JBL BassPro Go on your audio device and select it. The To enter Full-Range Mode, press and hold the Connect button Bluetooth button will remain illuminated when pairing is complete.
• Signal-to-Noise Ratio: >70dB (1W output at 4 ohms) JBL Connect • THD+N @ 4-ohm: <1% You can link a second JBL BassPro Go, for simultaneous playback • Input Sensitivity, selectable: High-level or low-level of two speakers. To link your devices: •...
VII. TROUBLESHOOTING No audio and POWER INDICATOR is off • No voltage at BATT+ and/or REM terminals, or bad or no ground connection. Check voltages at amplifier terminals with VOM. No audio and PROTECT INDICATOR is on • Check to see if the input voltage is less than 9V or greater than 16V on BATT+ connection and vehicle charging system.
Page 8
Max Operation Temperature: 45oC The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN ® International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Need help?
Do you have a question about the JBL BASSPRO GO and is the answer not in the manual?
Questions and answers