Sanding With The Cobra Classic - Pallmann COBRA CLASSIC Translation Of The Original Operating Instructions

7.10 Sanding with COBRA CLASSIC
1. Before starting the machine, the main lifting lever for the sanding drum (1) must be in the
rear position. The sanding drum is clearly raised from the floor. The distance to the floor is
approx. 15 mm.
2. Before starting the machine, ensure that the sanding belt is tightened.
3. Bring the machine into the start position.
4. Set the switch to setting „I". Once the motor has started up, switch to setting „II".
This gradual start-up procedure avoids high start-up currents.
PALLMANN GmbH l Ein Unternehmen der Uzin Utz AG | Im Kreuz 6 | 97076 Würzburg | Telefon +49 931 27964-0 | Telefax +49 931 27964-50 I www.pallmann.net
19