Adjusting The Sanding Pressure; Safety Instructions For Electric Cable And Connectors - Pallmann COBRA CLASSIC Translation Of The Original Operating Instructions

7.6 Adjusting the sanding pressure
Use the pressure regulating screw to adjust the required sanding pressure.
High sanding pressure:
Turn the pressure regulating screw inwards as far as it will go.
Low sanding pressure:
Turn the pressure regulating screw outwards to the red marking (2) on the screw thread.
7.7 Safety instructions for electric cable and connectors
Caution! Mortal risk from electric shock!
There is a mortal risk from electric shock if the machine is used when the electric cable
or connectors are damaged. If the electric cable and connectors are damaged, they must
be replaced by a qualifi ed electrician.
Caution! Mortal risk from electric shock!
Running over the electric cable with the sander entails a mortal risk from electric shock!
Never point the machine towards the cable!
PALLMANN GmbH l Ein Unternehmen der Uzin Utz AG | Im Kreuz 6 | 97076 Würzburg | Telefon +49 931 27964-0 | Telefax +49 931 27964-50 I www.pallmann.net
14