6.2 Removing the motor
Caution! Injury to the operator or other persons could occur or damage could occur if the machine
starts up unintentionally. Disconnect the machine from the power supply before working
on the machine!
Instructions
1. Make sure that the motor switch is
in the off position and that the
mains cable is disconnected from
the motor plug.
3. Lift belt tensioner (2) until locating
pin (3) snaps.
4. Remove the belt (1).
6. Remove the knurled nut from the
motor bracket.
7. Now you can remove the motor.
PALLMANN GmbH l Ein Unternehmen der Uzin Utz AG | Im Kreuz 6 | 97076 Würzburg | Telefon +49 931 27964-0 | Telefax +49 931 27964-50 I www.pallmann.net
10