Table of Contents
Advertisement
BLADE REPLACEMENT
The Electric Metal Shears can quickly start up when handling while plugged in
to electrical supply causing serious personal injury. Always unplug the tool from
the electrical supply before changing Cutting Blades or performing maintenance.
Blade replacement requires a high level of dexterity and patience to achieve
installation and alignment. Refer to photos for positioning.
BLADE REMOVAL
1. Using the included 4mm Hex Key,
loosen but do not remove the three
Socket Head Screws in the Cutting
Head (FIG 1).
2. Pull the Cutting Head from the
Shears (FIG 2).
3. Using included Allen 4mm Hex Key,
loosen and remove the two forward
socket head cap screws.
4. Remove Blades & Bushing/Spacers.
Carefully note the posi-
tion of the Blades and
Bushing/Spacers for
proper position during
reassembly! (Fig 3).
To order parts and supplies: 800.343.9353 >> eastwood.com
INJURY HAZARD!
FIG. 2
FIG. 3
7
Advertisement
Table of Contents
