Network Setup - Setra Systems MRMS User Manual

Note: The master Supervisor password is 351, and will work for any condition where a user
may need to reset passwords.

3.5 Network Setup

Note: If you are planning to use the USB Configuration Cloning feature, follow that process
first before network setup. Otherwise, the cloning process will overwrite network
information and affect MS/TP communications.
The BACnet setup screen is enabled by pushing position 1 switch (labeled MAC) to the on
(right) position (on). After configuration, the switch must be moved to the off (left) position.
The Network Setup screen gives the option for the user to setup addressing to the network.
16
Five position dip
sw itch location