Flying - Using Flight Modes - Reely GeNii Mini RtF Operating Instructions Manual

Remember
• Use the Position Flight Mode in combination with Return-To-Home.
• For Return-To-Home to work, the aircraft must be able to record the GPS coordinates before take off, and
be receiving a good quality GPS signal.
• Keep your flying path free of obstacles to avoid accidents. Fly the aircraft in open flat terrain (no tall buildings
within a 50 meter radius and flat terrain within a 10 meter radius).
5.8 Flying – Using flight modes
5.8.1 Position flight mode
This mode is suitable for beginner pilots. It uses GPS to achieve accurate hovering, intelligent following and other
assistance features.
Remember
• This mode supports Return-To-Home as long as the GPS coordinates are recorded before you take off.
Activating
• It is the default mode after powering
on the aircraft.
• Press the <Flight mode switch>
button on the remote controller until
you hear a beep sound.
5.8.2 Altitude flight mode
Altitude Flight Mode is for experienced pilots.
In this mode, you can fly the aircraft with or without GPS signal (flying with GPS is the recommended option). If GPS
is turned off, you will fly the aircraft manually.
Activating
Press the <Flight mode switch> button
on the remote controller until you hear
a beep sound.
Indicator lights
Left indicator light on the control-
ler turns solid green.
Indicator lights
The left indicator light on the
controller turns solid red.
Notes
• Wait until the GPS turns on
before flying.
• The aircraft automatically posi-
tions itself and hovers steadily.
Notes
Certain environmental factors, such
as airflow, might affect the flight,
resulting in drifting or hovering
failure.
17