For Your Safety - SPIT 372 Operating And Maintenance Instructions Manual

For your safety

Non-observance of the safety instructions and
the prescriptions regarding the prevention of
accidents will occur the risk of injury!
See enclosure for further safety instructions!
Please observe the general drawing and explanations on the inner
cover!
This machine can be operated safely only when the operat-
ing instructions have been completely read and strictly
observed to. It is recommended to receive practical
instruction before using the machine for the first time.
Always inspect cable and plug before using the machine. Have
damage repaired only by a qualified professional.
In order to avoid any risks, the connecting cable – if damaged –
has to be replaced by the manufacturer or his agency.
Insert plug in power supply socket only when machine is switched
off.
The tool is provided with a torque limiter which protects the oper-
ator if the drill bit gets stuck. This torque is however controlled only
if the user is holding the tool firmly with both hands and is
in a stable position (e.g. not on a ladder).
The machine must not be used when damp and must not be
operated in wet environment.
Never use the machine without the auxiliary handle (6).
Do not touch rotating tools.
Use safety glasses, ear protectors, dust protection mask as well
as wear protective gloves and safety shoes.
Beware of electric lines, gas and water pipes embedded in walls.
Use only genuine accessories.
GB
7