Technical Information; Declaration Of Conformity - SPIT 372 Operating And Maintenance Instructions Manual

Technical information

Characteristics
Noise
Vibration
Declaration
of conformity
8
Tool fixing ............................................................... S2S max
Voltage ...................................................110 V ............230 V
Frequency ...............................................................50-60 Hz
Amperage .............................................10.8 A ............5.7 A
Power input ...............................................................1250 W
Rotation speed ...................................................0 - 260 min
Hammer rate strokes ..........................................0 - 2700 min
Impact energy ...............................................................10 J
Weight........................................................................7.9 kg
Cable length ..................................................................4 m
Carbons ......................................................self-disconnecting
Lubrication .........................................................oil lubrication
Angle of chisel ......................................................8 positions
Switch ...................................................with electronic control
Class II ...........................................................................
Min. distance from the wall in order to drill ........................39 mm
Dimensions (mm) .............................................480 x 280 x 120
Measured values determined according to EN 60745. Typically the A-
weighted noise levels of the tool are:
Sound pressure level
Sound intensity level
Wear ear protection!
The typical weighted acceleration at rear handle is
18,8 m/s
The typical weighted acceleration at front handle is
13,3 m/s
We declare under our sole responsibility that this product is in con-
formity with the following standards or standardized documents:
IEC 60745-1, IEC 60745-2-6, EN 60745-1, EN60745-2-6, EN 55014,
EN 61000-3, EN 55104, in accordance with the regulations
73/23/EEC, 89/336/EEC, 98/37/EC
Didier BOURRETTE
SPIT S.A., Route de Lyon - B.P. 104, F-26501 Bourg-les-Valence
chisel: 1(97 + 3) dB(A) drill: 1(95 + 3) dB(A)
chisel: (108 + 3) dB(A) drill: (106 + 3) dB(A)
2 (chisel) 18,7 m/s
2 (chisel) 12,7 m/s
Jens STELLWAG
-1
-1
2 (drill).
2 (drill).