Exhausting Mode; Recirculation Mode (With Carbon Filter); Using The Hood; Speed Regulation - Electrolux EFG 732 X User Manual

Exhausting mode

Connect the air outlet to the smoke exhaust
hose.
On the version EFG 732 X check that the two
internal shutters S (Fig. 8) are open.
Recirculation mode (with carbon
filter)
Remove the metal grease filter grill.
Fold the grips upwards and press the locking
slide in at the side (Fig. 5)
Fit the carbon filter into the lamp side 1 (Fig. 9)
by pressing the two red lugs, 2, of the filter in
and clip the filter in upwards into the hood.
Refit the metal grease filter.
The current of air is to be diverted forwards or
sideways into the room in a suitable fashion.
The hood with the denomination EFG 732 X has
two internal shutters S (fig. 9) behind the grease
filter. These are at delivery open. Before mount-
ing the carbon filter they should be shut.

Using the hood

Speed regulation

The hood has a three speed motor
regulated with a slide switch. For
the best performance, we recom-
mend using the lower speeds in
normal conditions and the highest
speed in particular cases of strong
odour and vapour concentration.
We recommend starting up the
hood a few minutes before cook-
ing and keeping it running until all
the odours have been eliminated.

Work light

The hood work light is independently switch on
and off with the proper push-button switch.

Correct ventilation

To have the cooker hood working correctly the
windows in the kitchen should be closed. In stead a
window in an adjacent room should be open.
S
Fig. 8
2
S
Fig. 9
0
1
2
3
Fig. 10

Important to know

If the hood is run at the same time as a burner or
fireplace that depend on ambient air (for example
gas, Diesel, coal or wood heaters, water heaters,
etc.) be careful, because the hood, when it exhausts
the air, removes the ambient air required by the
burner or fireplace for combustion.
Not valid if the cooker hood is used in
recirculation mode.
47
2
1
S
S