Table of Contents
Advertisement
Mounting under cupboard
Make the holes on the bottom of the cupboard,
using the drilling template (Fig. 7).
From inside the cupboard, insert the 4 sup-
plied screws and tighten them in the appropri-
ate holes on the appliance.
Exhausting mode
Connect the air outlet to the smoke exhaust
hose
Open the suction grid (Fig. 12).
Check that the selection levers d for evacua-
tion/recycle is in the position A - external
evacuation. (Fig. 8).
Refit the suction grid.
Recirculation mode (with carbon
filter)
The air outlets D (Fig. 2) must be shut.
Open the suction grid (Fig. 12).
Check that the selection lever for evacuation/
recycle is in the position : F - recycle (Fig. 9 -
Pull both selectors d towards the centre of the
appliance).
Fit carbon filter first rearwards on the proper
seats.
Then fix frontwards the carbon filter using
hooks C (Fig. 9)
Refit the suction grid.
Using the hood
Speed regulation
The hood is provided with two motors with
continues speed regulation plus a position for
intensive operation. For the best performance,
we recommend using the low speeds in normal
conditions and the high speeds or intensive in
particular cases of strong odour and vapour
concentration.
We recommend starting up the hood a few
minutes before cooking and keeping it running
until all the odours have been eliminated.
2
Fig. 7
d
A
Fig. 8
C
Fig. 9
Fig. 10
33
1
2
3
4
4,2 x 35
1
3
4
d
A
d
F
C
0 I
0
d
Advertisement
Table of Contents
