Demounting Of The Hood; If The Hood Does Not Function; Service And Spare Parts - Electrolux EFG 732 X User Manual

Demounting of the hood

Remove the metal grease filter and the housing
cover.
Remove the 4 additional screws from the frame.
Loosen the screws on the two fixing springs
(Fig. 14).
Push a flat screw driver into the hole for the
fixing springs (left and right) and push each of
the fixing springs inwards (Fig. 15).
At the same time, pull the hood (left and right)
out of the cabinet.

If the hood does not function

Before you make contact to service
Check that the power plug is connected to the wall
power outlet and that no fuse is blown. Do not do
any operations that can cause hazard or damage to
the product. If the problem remains contact your
dealer or an approved service company
Remember to save the purchase recite and the
Warranty card (only used in some countries)

Service and spare parts

Service and spare parts you will get via your dealer
or service company.
When you order service or spare parts you should
be ready to give the product number and model
denomination. This information you will find on
the rating label.
Take away the grease filter and you will find the
rating label behind.
Model:
Product number:
Date of purchase:
Fig. 14
Fig. 15
49