Model Description; Unloading; Exterior Loading; Shipping Skid - Hussmann HGM-3 BS Installation & Operation Manual

I
1-4
nstallatIon

MODEL DESCRIPTION

The HGM-BS/TS models are self-contained,
medium temperature, vertical glass door
merchandisers designed for the display of dairy
products, deli items and beverages. Design
features include self-closing glass doors,
efficient foamed in place non-CFC insulation
and balanced R-134a refrigeration systems for
energy saving performance.

UNLOADING

Unloading from Trailer:
Lever Bar (also known as a Mule, Johnson
Bar, J-bar, Lever Dolly, or Pry Lever)
Move the merchandiser as close as possible to
its permanent location and remove all packaging.
Check for damage before discarding packaging.
Remove all separately packed accessories such
as kits and shelves.
Improper handling may cause damage to
the merchandiser when unloading. To avoid
damage:
1. Do not drag the merchandiser out of the
trailer. Use a Johnson bar (mule).
2. Use a forklift or dolly to remove the
merchandiser from the trailer.
Do not store objects or flammable
materials atop the unit.
Do NOT remove shipping crate until the
merchandiser is positioned
for installation.
P/N 0515297_E

EXTERIOR LOADING

Do NOT walk on top of merchandisers or
damage to the merchandisers and serious
personal injury could occur.
merchandisers are not structurally
designed to support excessive external
loading
not place heavy objects on the merchandiser.

SHIPPING SKID

Each merchandiser is shipped on a skid to
protect the merchandiser's base, and to make
positioning the case easier.
Remove the top of the crate and detach walls
from each other. Lift crate from the skid.
Unscrew the case from the skid. The fixture
can now be lifted off the crate skid. Lift only at
base of skid! Remove any braces and/or skids
attached (blanket wrapped merchandiser may
have skids).
DO NOT TILT MERCHANDISER ON ITS
SIDE OR END WHEN REMOVING SKID.
Tilting merchandiser could cause damage to
the refrigeration system.
Once the skid is removed, the merchandiser
must be lifted —NOT PUSHED— to reposition.
To remove the skid, remove screws attaching
skid to the merchandiser.
Check floor where cases are to be set to see if
it is a level area. Determine the highest part of
the floor.
Unpack door and all packaged accessories.
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
such as the weight of a person. Do