Volume / Level Control - Audiovox Prestige P-99A Owner's Manual

OPERATING INSTR OPERA OPERA TING INSTR TING INSTRUCTIONS TING INSTR
OPERA OPERA TING INSTR
ON/OFF POWER BUTTON
Press this button to turn the unit on or off. The unit will also turn on
automatically when a compact disc is inserted if the ignition switch
is "on" or when any front panel button is pressed.

VOLUME / LEVEL CONTROL

To increase the volume level, turn the knob clockwise. The
volume will increase and the level will be shown on the display
panel from a minimum of "VOL 00" to a maximum of "VOL 63". To
decrease the volume level, turn the knob counter-clockwise. The
display will automatically return to the normal indication 5 seconds
after the last volume adjustment or when another function is acti-
vated. These buttons are also used in conjunction with the Select
button to adjust the bass, treble, balance, and fader levels as
described in , , and
UCTIONS UCTIONS UCTIONS
UCTIONS
.
SELECT BUTTON (SEL)
CONFIRMATION TONE SELECTOR (
This button is used to select the audio function (volume, treble,
bass, balance, or fade) to be adjusted using the Level Control
Pressing the Select button once will set the unit for treble ad-
justment ("TRE" will appear on the display panel). Pressing the
button additional times will select bass ("BAS" on the display), bal-
ance ("BAL"), fader ("FAD") or volume ("VOL"). The display will
automatically return to the normal indication 5 seconds after the
last adjustment or when another function is activated.
Pressing and holding the button for longer than 2 seconds will
activate the Confirming Tone feature as indicated by two beep
tones and the indication appearing on the display panel. When
activated, the unit will produce a single beep tone whenever a
-1-
)
.