Atos PROVOX LaryButton When And How To Use

Atos PROVOX LaryButton When And How To Use

Advertisement

CareTips
Provox® LaryButton™ - When and How to Use
The Provox LaryButton inserts into the stoma to hold the Provox® Heat and
Moisture Exchanger (HME), Provox® Shower Aid or the Provox® FreeHands
HME™. The LaryButton can help maintain the size of the stoma and prevent
the stoma from shrinking. The LaryButton may be able to stay in the stoma by
itself or may need to be held in place with Provox® LaryClips or Provox®
TubeHolder.

1. Sizing of the Provox LaryButton

• Your ability to use the LaryButton depends on the size and shape of
your stoma. It should fit well into your stoma without causing irritation.
Always discuss with a clinician before using a LaryButton. Your clinician
will be able to help you decide which LaryButton is best for you.

2. Inserting the Provox LaryButton

• Lightly lubricate the small end of the LaryButton that fits into your
stoma. Only use a water soluble lubricant.
• Fold the narrow end with your fingers or a blunt hemostat and hold it
firmly folded.
• Insert the narrow end into your stoma and release your fingers or the
hemostat.
• Gently tug on the LaryButton wings to ensure the LaryButton is seated
in the correct position.
• Make sure that the LaryButton is in the correct position and that it is
not pushing on the voice prosthesis.
• The LaryButton can be attached with Provox LaryClips or a Provox
TubeHolder if necessary.
• Insert a Provox HME or Provox FreeHands HME into the opening of the
LaryButton.

3. Wearing your Provox LaryButton

• Determine an appropriate wear schedule with your clinician
• If you are having difficulty getting used to wearing your Provox
LaryButton, wear it for short periods of time, gradually increasing the
length of time as tolerance improves.
• Do not wear your LaryButton during the night. Use a Provox
Adhesive or a LaryTube with a smaller diameter so your stoma can
shrink back down a bit.
This text does not replace nor does it set forth the complete contents of the User Manual and/or Prescriber Information for the products in this text,
and is not a substitute for reviewing and understanding that important information. Therefore, before prescribing and/or using any of the products
included in this text, please review the entire contents of the respective User Manual and/or Prescriber Information.
clinicalaffairs@atosmedical.com • www.atosmedical.us
© Atos Medical AB, Sweden
Topic 4:
Provox® LaryButton™ -
When and How to Use
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PROVOX LaryButton and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Atos PROVOX LaryButton

  • Page 1 When and How to Use Provox® LaryButton™ - When and How to Use The Provox LaryButton inserts into the stoma to hold the Provox® Heat and Moisture Exchanger (HME), Provox® Shower Aid or the Provox® FreeHands HME™. The LaryButton can help maintain the size of the stoma and prevent the stoma from shrinking.
  • Page 2 LaryButton in place. 5. Removing the Provox LaryButton • Hold the Provox LaryButton by the sides and gently turn it half way around to allow the narrow end to collapse. • Remove the LaryButton by tilting it out of the stoma.

Table of Contents