Atos Provox LaryTube When And How To Use

Atos Provox LaryTube When And How To Use

Advertisement

CareTips
Provox® LaryTube™ - When and How to Use
The Provox LaryTube is a soft silicone tube designed to hold the Provox® Heat
and Moisture Exchanger (HME) and Provox® FreeHands HME and is placed in
the stoma to prevent it from shrinking. The LaryTube or Provox® OptiDerm™
adhesive can be used as an alternative to your regular adhesive when the skin
is irritated. It can also be used during radiotherapy if you find you are
temporarily unable to use an adhesive.
The Provox LaryTube is available in
three versions:
• Fenestrated version – For voice prosthesis users. Designed with holes so
that air can go through the tube to the voice prosthesis. Can be attached
with a Provox® TubeHolder or Provox® LaryClips™.
• Standard version – Made for use with or without a voice prosthesis.
Custom punctures can be made using the Provox FenestrationPunch. Can
be attached with a Provox TubeHolder or Provox LaryClips.
• Blue Ring version – Can only be attached with a Provox Adhesive.
Punctures can be made with the fenestration punch for voice
prosthesis users.
1.

Sizing of the Provox LaryTube

• The Provox LaryTube is available in four diameters and three lengths.
• The stoma should be just slightly bigger than the Provox LaryTube.
• It is important that the Provox LaryTube you use is of the correct
type, width, and length. The LaryTube should fit well into your stoma
without causing irritation. Your clinician can help you determine which
LaryTube is the best solution for you.
Tip:
Voice prosthesis users should be cautious when inserting
the Provox LaryTube. Direct the LaryTube in and down to
avoid catching the voice prosthesis with the end of the
LaryTube as this may cause accidental dislodgement.
Tip:
Contact your clinician if you experience irritation from
the tube or if you feel the tube has become too large
or too small. You may need a different size.
This text does not replace nor does it set forth the complete contents of the User Manual and/or Prescriber Information for the products in this text,
and is not a substitute for reviewing and understanding that important information. Therefore, before prescribing and/or using any of the products
included in this text, please review the entire contents of the respective User Manual and/or Prescriber Information.
clinicalaffairs@atosmedical.com • www.atosmedical.us
© Atos Medical AB, Sweden
Topic 3:
Provox® LaryTube™ -
When and How to Use
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Provox LaryTube and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Atos Provox LaryTube

  • Page 1 When and How to Use Provox® LaryTube™ - When and How to Use The Provox LaryTube is a soft silicone tube designed to hold the Provox® Heat and Moisture Exchanger (HME) and Provox® FreeHands HME and is placed in the stoma to prevent it from shrinking. The LaryTube or Provox® OptiDerm™...
  • Page 2 • Lightly moisten the tube with water or a thin coating of water soluble lubricant. • Attach the Provox LaryTube with Provox LaryClips, a Provox TubeHolder, or a Provox Adhesive (Blue Ring LaryTube only). • Insert the Provox LaryTube into the stoma.

Table of Contents