Installing An Additional Network - Grundig Sonoclock 895 WEB DAB+ Manual

SPECIAL­SETTINGS
Installing­an­additional­network­
Use this function when you wish to operate your
device at a different location using a different
network.
The first network (home network) is retained.
1 Press »MENU« to open the menu.
2 Select the option »System settings« with » «
or » « and press »OK« to confirm.
3 Select the option »Network« with » « or
» « and press »OK« to confirm.
4 Select the option »Internet Wizard« (if a
standard router is used) or the option »PBC
Wlan setup« (if a router with WPS-PBC/Push-
Button-Configuration is used) with » « or
» « and press »OK« to confirm.
Notes:
If the option »PBC Wlan setup« has been
7
selected, press the WPS button on the
router and then continue the registration
using »OK«.
Your device is registered on the router auto-
7
matically. No further settings are required.
5 Select the network with » « or » « and
press »OK« to confirm.
– The »Key« menu appears (if the network is
encrypted), and the cursor is positioned at
the first input field.
Note:
If the network is encrypted, the network
7
key (security code WEP or WPA) must be
entered.
6 Enter network key:
Enter the first character with » «, » «, » « or
» « and press »OK« to confirm.
Repeat entry for the remaining characters.
When the network key has been entered com-
pletely, select the push button OK« with » «,
» «, » « or » « and press »OK« to confirm.
– The »Internet Setup« menu appears, the
registration on the network is processed.
44­
ENGLISH
­-----------------------------------------------------------------------------------------------------
Notes:
Numbers, capital and lower case letters as
7
well as special characters are available for
input.
Scroll through the menu pages with » « or
7
» « in order to select other characters.
If you make a mistake during entry, press
7
» «, » «, » « or » « to select the push
button »BKSP« and press »OK« to confirm.
The last character is deleted.
If you wish to exit the menu prematurely,
7
press » «, » «, » « or » « to select the
push button »CANCEL« and press »OK«
to confirm. The device switches back one
menu level.
– A fter successful registration, the message
»Setup wizard completed« appears.
7 End the setting by pressing »OK«.