Displaying Software And Id Information; Displaying Information And Network Status; Installing An Additional Network - Grundig Sonoclock 890 A WEB Manual

SPECIAL­SETTINGS
Displaying­Software­and­ID­
information
1 Press »MENU« to open the menu.
2 Select the option »System settings« with »
or » « and press »OK« to confirm.
Λ
3 Select the option »Info« with »
press »OK« to confirm.
– The name of the device, the software ver-
sion and the Radio ID (MAC address) are
displayed.
4 Press »MENU« to end the display.
Displaying­information­and­net-
work­status
You can display information about your device
and the network used. Settings cannot be made
in this menu.
1 Press »MENU« to open the menu.
2 Select the option »System settings« with »
or » « and press »OK« to confirm.
Λ
3 Select the option »Network« with »
» « and press »OK« to confirm.
Λ
4 Select the option »View settings« with »
» « and press »OK« to confirm.
Λ
5 Select the required information with »
» «.
Λ
– Display: »Active connection« e.g. WLAN is
active;
»WLAN region:« e.g. Most of Europe;
»DHCP:« e.g. DHCP enabled;
»SSID:« network name, e.g. »Netgear«;
»IP address:« (e.g. 192.168.99.131);
»Subnet mask:« (e.g. 255.255.255.0);
»Gateway address:« (e.g. 192.168.2.1);
»Primary DNS:« (e.g. 192.168.2.1)
»Secondary DNS:« (e.g. 0.0.0.0).
6 Press »MENU« to end the display.
­-----------------------------------------------------------------------------------------------------
Installing­an­additional­network­
Use this function when you wish to operate your
device at a different location using a different
network.
«
V
The first network (home network) is retained.
1 Press »MENU« to open the menu.
« or » « and
V Λ
2 Select the option »System settings« with »
3 Select the option »Network« with »
4 Select the option »Internet Wizard« with »
«
V
« or
V
« or
V
5 Select the network with »
« or
V
6 Enter network key:
Enter the first character with »
Repeat entry for the remaining characters.
When the network key has been entered
or » « and press »OK« to confirm.
Λ
» « and press »OK« to confirm.
Λ
or » « and press »OK« to confirm.
Λ
Notes:
I f you used a router with WPS-PBC/Push-
7
Button- Configuration select the network
»[WPS] XXX« with »
»OK« to confirm.
S elect the option »Push Button« with »
7
» « and press »OK« to confirm.
Λ
A ctivate the »Push Button« function on the
7
router (menu or button) and press »OK« on
the device within 2 minutes. No further set-
tings are required.
press »OK« to confirm.
– The »Key« menu appears (if the network is
encrypted), and the cursor is positioned at
the first input field.
Note:
If the network is encrypted, the network key
7
(security code WEP or WPA) must be en-
tered.
» « and press »OK« to confirm.
completely, select the push button »
» «, » «, » « or » « and press »OK« to
V Λ
confirm.
– The »Internet Setup« menu appears, the reg-
istration on the network is processed.
«
V
« or
V
«
V
« or » « and press
V Λ
« or
V
« or » « and
V Λ
«, » «, » « or
V Λ
8
« with
39­
ENGLISH