Tecomec GEOline ORION Instruction Manual page 15

This manual is made up of two separated parts.
The first one is addressed both to the final user and the Skilled technician; the second part is reser-
ved to the Skilled technician.
By Skilled technician we mean:
• the producer of the machine (for instance a motor-driven pump) or system (for instance a pumping
station) on which the control unit is installed
• a person, generally belonging to the service centre, who has been especially trained and authorised
to carry out extraordinary maintenance operations on the control unit and on the machine equipped
with the control unit.
1. g i
eneral nformation
We congratulate with you for choosing one of our products and would like to remind you that this
product has been manufactured paying the maximum attention to operators' safety, its work efficiency
and the environmental protection.
To preserve these features in time, we recommend to carefully read this manual and invite you to
follow what written in it.
Special attention must be reserved to the reading of parts marked by the symbol:
because they contain important safety instructions for the use of the control unit.
The producer refuses any responsibility for:
• lack of compliance with what contained in this manual and in the manual of the machine equipped
with the control unit;
• different usages from those mentioned in the paragraph "INTENDED USE";
• use contrary to the current safety and prevention safety regulations;
• incorrect installation;
• serious failings in the recommended maintenance;
• modifications or operations unauthorised by the Producer;
• use of non-original spare parts or parts that are not specific for this control unit;
• repairs not carried out by a Skilled Technician.
1.1 W C
arranty onditions
The warranty is valid for 24 months from the date indicated on the selling document ( invoice, etc.)
with free of charge replacement or repair of products having proven manufacturing faults. We reserve
the right to inspect the product, its installation and/or the way in wich it has been used. The products
to be repaired must be returned to us freight prepaid, while all repair and return charges will
be at our expenses. We will not reimbourse expenses for disassembly or reassembly, nor will
accept any damage or indemnification claim.
The replaced parts become a property of the Producer.
Possible failures or breaks that should take place during and after the guarantee period do not give
right to the payment suspension nor to further delays.
The warranty does not include the replacement of the complete control unit and ends automatically if
the agreed terms of payment are not respected.
Foreword
First Part
CAUTION
Instruction Manual
ENG
15