Operation Instructions - ElectrIQ EIQMW20LSS Instruction Manual

OPERATION INSTRUCTIONS

This microwave oven uses modern electronic controls to adjust cooking
parameters in order to meet your needs for a better cooking experience.
1. Set the Clock
When the microwave oven is powered on, the display will show "0:00",
and the buzzer will bleep once.
Press " CLOCK/PRE-SET ", the hour figure flash;
1)
Turn to adjust the hour figure (in the range 0—23)
2)
Press "CLOCK/PRE-SET", the minute figures will flash.
3)
Turn to adjust the minute figures. (in the range 0—59)
4)
Press "CLOCK/PRE-SET" to finish clock setting. The ":" between the
5)
numbers will start to flash.
Note: During the process of clock setting, if you press "STOP/CLEAR",
the oven will go back to the previous status automatically.
2. Microwave Cooking
1. Press the "MICROWAVE" key once, and "P100" will flash.
2. Press "MICROWAVE" repeatedly or turn
power from 100% to 10%. "P100", "P80", "P50", "P30", "P10" will
display in order.
3. Press "START/+30SEC./CONFIRM" to confirm your selection.
4. Turn to adjust the cooking time. (The time setting should be 0:05-
95:00.)
5. Press " START/+30SEC./CONFIRM " to start cooking.
NOTE: the step quantities for the adjustment time of the coding switch
are as follow:
0 ---1
1 --- 5 min
5 --- 10 min
10 --- 30 min
30 --- 95 min
min 5 seconds
10 seconds
30 seconds
1 minute
5 minute
10
to reduce the microwave