Operation Instructions; Power Saving Mode; Manual Operation; Pause Cooking - ElectrIQ EIQMWCOM25 Instruction Manual

Table of Contents

Advertisement

OPERATION OF THE MICROWAVE
When first powered up the microwave will enter standby mode and "-- --" will be displayed
on the screen. Before using the controls of the microwave the door must be opened and
closed to enter Standby Mode, "0:00" will be displayed on the screen.

POWER SAVING MODE

The microwave will enter Power Saving Mode if while in standby mode the
pressed, or if there is no input during the standby duration (Default: 60 Seconds). During
Power Saving Mode the buttons are disabled and the screen will be blank. To exit Power
Saving Mode open and close the microwave door to enter Standby Mode.

MANUAL OPERATION

1. With the microwave in standby press the
the screen.
2. Type in the cooking time required, eg for 1 minute and 25 seconds, press 1, then 2,
then 5.
3. The microwave will default to full power, to choose a different power level press the
appropriate power level button. To revert to full power press the same button again.
Level
Power
Display
4. Press
to start cooking. The microwave will display the remaining cooking time.

PAUSE COOKING

The cooking operation can be paused by pressing the
microwave door*. While paused the cooking operation can be restarted by pressing the
button, or cancel by pressing the
standby mode.
*The setting for door opening can be changed between pausing operation and cancelling
cooking. See the Microwave Settings section.

WHEN THE COOKING PROGRAM HAS FINISHED

By default when the cooking program completes, the microwave will give a 3 second bleep
while displaying "END", before returning to standby mode. This can be changed so that
the microwave will continue to bleep until either the door is opened or
the Microwave Settings Section for more information.
High
M. High
100%
70%
PL10
PL7
button. This would return the microwave to
9
button, "00:00" will be displayed on
Med.
Defrost
50%
20%
PL5
PL2
button, or by opening the
button is
Hold
0%
PL0
is pressed. See

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents