General Information About Jumbo Home; Battery Information; Prior To First Use Of Batteries; Maintenance Of Batteries - Linak JUMBO Home User Manual

Battery replacement
Table of Contents

Advertisement

General information about the JUMBO Home
The JUMBO Home (in short CBJ-Home) is a specially developed solution for patient lifts. The complete
system consists of a control box and a battery enclosed in a single elegant module. The CBJ-Home is
medically approved and contains a series of features ensuring a safe comfortable lift, e.g. the CBJ-
Home is equipped with a soft-start function, emergency lowering, emergency stop etc.
The CBJ-Home-batteries are ventilated through a number of ventilation holes on the rear of the
housing.
Mounting of CBJ-Home (only vertically)
UP
Down

Battery information:

Prior to first use of the batteries
Prior to first use of the batteries, please make sure that they are charged 24 hours in order to reach
proper function and prolong the lifetime of the batteries.

Maintenance of batteries

For an optimum lifetime the product must be charged as often as possible.
The batteries must be charged at least every 3
discharge. It is recommended to test the battery function at least once every year.
The batteries are to be replaced after approximately 4 years or earlier, dependent on the pattern of
use. Frequent and high-powered discharges reduce the battery life.
Authorised replacement of battery
Only an authorised LINAK service centre or a properly trained customer should change the battery in
a CBJ-Home. If a CBJ-Home is opened and a battery changed by an unauthorised person there is a
risk that it may malfunction at a later date.

Tamper proof

As of Q4, 2017, LINAK has introduced a security label for
tamper proof. The use of the security label makes it easier to see
if batteries have been replaced by non-authorized persons.
The labels consist of a polyester clear film with special void
effect and follow the contours of the control box. Once
applied to the substrate sun removal, an irreversible and dry
"void" footprint message will detach itself from the face film.
Labels which have been removed cannot be reapplied since
repositioning will leave visible proof that the product has
been opened.
month - otherwise they will be damaged due to self-
rd
Placement and presented like below:
Page 5 of 12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cbj-home

Table of Contents