Replacement Of Batteries - Step By Step - Linak JUMBO Home User Manual

Replacement of batteries - step by step:

1. Remove all external cables from the control box
2. Dismount the CBJ-Home.
3. Unscrew and remove the 7 torx screws on the rear of the CBJ-Home.
4. Remove the back cover. Please note that there are two assembly versions
(Produced before 1 January 2008)
The batteries must be turned the same way when the replacement batteries are connected.
Remember how the polyfuse is placed (the polyfuse is the square shaped article connected
to the wires). It must be placed in the same way again. Be careful not to bend the polyfuse
steel wires.
5. Place the batteries in an upright position
Note whether the battery poles are pointing downwards
or
upwards
(drawings of batteries from the side).
Page 7 of 12
(Produced after 1 January 2008)