Location; Shipment; Receiving - SPX Marley LW032 B Series User Manual

receiving and hoisting
Those are only some of the safety issues that may arise in the design
process. SPX strongly recommends that you consult a safety engi-
neer to be sure that all safety considerations have been addressed.

Location

Space available around the fluid cooler should be as generous as possible
to promote ease of maintenance and to permit freedom of airflow into and
through the fluid cooler. If you have questions about the adequacy of the avail-
able space or the intended configuration of the equipment, please contact
your Marley sales representative for guidance.
Prepare a stable, level support foundation for the fluid cooler, utilizing weight,
wind load, and dimensional information appearing on appropriate Marley
submittal drawings. Supports must be level to insure proper operation of the
fluid cooler.
The fluid cooler must be located at such distance and direction to
Warning
avoid the possibility of contaminated discharge air being drawn
into building fresh air intake ducts. The purchaser should obtain the
services of a Licensed Professional Engineer or Registered Architect
to certify that the location of the equipment is in compliance with
applicable air pollution, fire and clean air codes.

Shipment

Unless otherwise specified, fluid coolers ship by truck (on trailer(s)), which
lets you receive, hoist, and install in one continuous operation.
Responsibility for the condition of the fluid cooler upon its arrival belongs to
the carrier as does the coordination of multiple shipments, if required.

Receiving

Prior to unloading the fluid cooler from the delivering carrier, inspect the ship-
ment for evidence of damage in transit. If damage is apparent, note the freight
bill accordingly. This will support your future recovery claim.
Find and remove the installation instructions accompanying the fluid cooler.
This information should be kept for future reference and maintenance purposes.
4