3-axis stabilized handheld gimbal for camera (25 pages)
Summary of Contents for FeiYu Tech MG Lite
Page 1
Guilin Feiyu Technology Incorporated Company MG Lite / MG V2 Gimbal Firmware Upgrade Manual Attention : Please install the batteries before firmware upgrade. The firmware upgrade software only supports the Windows operation system provisionally. Please operation step by step strictly and make sure click the ―OPEN‖ button to open the com port before the USB mini terminal of the USB cable connect to the gimbal.
Page 2
Guilin Feiyu Technology Incorporated Company 4. Software interface is shown in following picture.: 5. Choose the correct port number and the correct baud rate-115200, then click OPEN button to open the com port.(The serial port number should be the same as the port number which checked in step 2). 6.
Page 3
UPDATE button to start upgrading, the process will display on the 8. Click on software. 9. Data of firmware being sent to the MG Lite or MG V2 completely, please click ―Confirm‖ button to finish the upgrade. Close the software then remove the USB cable.
Page 4
Guilin Feiyu Technology Incorporated Company –––– –––– Note: We reserve the right to change this manual at any time! And the newest edition will be shown on our website www.feiyu-tech.com. Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com service@feiyu-tech.com - 4 -...