Hitachi RZ-V100CYH Operating Instruction And Cook Book page 10

Safety Precautions - continued
To prevent injuries or burns while cooking rice
There is a risk of burns or injuries. (The rice cooker can be dangerous when used incorrectly because pressure builds up when the cooker is operating.)
●
Be sure to attach the steam cap. (There is a
risk that burns may result from boiling over or
hot steam rushing out of the cooker.)
Instruction
●
Before starting cooking, remove the inner lid and plate to make sure that there are no
grains of rice or other foreign substances that have stuck to the regulator or safety valve.
Be sure to attach the plate.
(Otherwise, hot water may spout out or the lid may open, causing burns.)
Plate
●
When closing the lid, press both sides
of the hook button and press down the
lid until it clicks into position.
Press both
sides of the
hook button.
●
If you have no other choice but to open the lid when the cooker is operating, press the
"Cancel/off" button to stop the cooking operation, and wait for approximately 30 seconds
until
·
Be careful that pressure will be released, causing steam to rush out of the steam vent.
●
If rice or other objects have stuck to the hook area, use a toothpick or a similar tool to remove them.
(Otherwise, they may prevent the lid from closing securely, thereby causing it to open unexpectedly, presenting
a risk of burns.)
Lid hook area
Check for rice
grains or any other
foreign objects.
E-10
Warning
Regulator valve
Safety valve
Click
stops flashing and goes off. Then, open the lid.
Lid
Inner lid (back)
●
Before opening the lid, make sure that
longer displayed and that no steam is coming out of
the steam vent, and slowly press the hook button.
Do not open the lid during cooking.
Hook button
Body hook area
Check for rice
grains or any other
foreign objects.
Steam vent
To attach the steam cap,
align it with the
depression in the lid and
press down on the front
center of the steam cap
until it clicks into position.
P.E-22
Regulator valve
●
Make sure that the
hole is not clogged.
Ball
●
Make sure that the
ball moves.
Safety valve
●
Make sure that it is
not clogged.
is no