Related Manuals for Ingersoll-Rand E688 Series
Summary of Contents for Ingersoll-Rand E688 Series
- Page 1 48484703 Edition 1 January 2012 Air Impact Wrench E688 series Product Information Product Information Product Information 产品信息 Save These Instructions...
- Page 2 PMAX (Dwg. 47132790) IR # - NPT IR # - BS inch (mm) IR # IR # IR # C38341-810 C383D1-810 1/2 (13) MSCF44 100-1lb Instruction 使用注意事项 F-R-L unit or equivalent is recommended. 一定要安装三联件或同等功能的过滤器和干燥器。 If an F-R-L is installed, it should be visually inspected regularly to be sure the filer is clean and that the lubrication oil is at or above the minimum suggested level.
- Page 3 Product Safety Information Intended Use: These Air Impact Wrenches are designed to remove and install threaded fasteners. For additional information refer to Air Impact Wrench Product Safety Information Manual Form 04580916. Manuals can be downloaded from www.ingersollrandproducts.com Product Specifications Recommended Torque Drive Range Impacts...
- Page 4 Parts and Maintenance When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so that they can be recycled. Original instructions are in English. Other languages are a translation of the original instructions. Tool repair and maintenance should only be carried out by an authorized Service Center.
- Page 5 产品安全信息 用途： 这些气动冲击扳手专门用于拆卸和安装螺钉。 更多信息，请参考《冲击扳手产品安全信息手册表04580916》。 手册可从www.ingersollrandproducts.com 下载。 产品规格 打击头 建议扭矩范围 冲击 型号 样式 正向 每分钟 类型 尺寸 英尺- 磅 Nm (ft-lb) 在90 PSI气压下运转的工具 271-3100 [3300 MAX] E688-8 外压 扳机 四方 8” 加长 1” (200-2300 [2450 MAX]) 在120 PSI气压下运转的工具 271-3500 [3800 MAX] E688-8 外压...
- Page 6 Notes:...
- Page 7 Notes:...
- Page 8 © 2012 Ingersoll-Rand Company...