Settings; Zone Selection Button Setting; Line Output Interlock Switch Setting; Audio Detection Function Setting - Toa A-3506D Operating Instructions Manual

8. SETTINGS

8.1. Zone Selection Button Setting

Set whether or not to use the front-mounted Zone selection buttons with Switch 1 of the DIP switch.
Tip
Even when the Zone selection button is set to OFF, you can perform zone selection using the rear-mounted
Zone control input terminal (see p. 14).
A-3506D/3512D/3524D/3548D
Switch 1
OFF: You can use the front-mounted Zone selection buttons. (Factory-preset)
ON: You cannot use the front-mounted Zone selection buttons.

8.2. Line Output Interlock Switch Setting

Set the interlock between zone selection and line output with Switch 2 of the DIP switch.
A-3506D/3512D/3524D/3548D
Switch 2
OFF: Signals are output from the Line output jacks 1 and 2 regardless of zone selection. (Factory-preset)
ON: Signals are output from the Line output jack 1 when the Zone 1 is selected and from the Line output jack
2 when the Zone 2 is selected.

8.3. Audio Detection Function Setting

Set whether or not to use the Audio detection function (see p. 20) for Input 1 with the Switch 4 of DIP switch,
and Input 2 with Switch 3 of the DIP switch.
A-3506D/3512D/3524D/3548D
Switches 3, 4
OFF: You cannot use the Audio detection function.(Factory-preset)
ON: You can use the Audio detection function.
17