Standards And Approvals; External View - M-system M2PRU Quick Start Manual

PERFORMANCE
Response time: 25 μsec. + input cycle + output cycle
(time required for the first pulse to be output from a train of
pulse input)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
to power to ground)
STANDARDS & APPROVALS
CE conformity:
EMC Directive (2004/108/EC)
EN 61000-6-4 (EMI)
EN 61000-6-2 (EMS)
Low Voltage Directive (2006/95/EC)
EN 61010-1
Installation Category II
Pollution Degree 2
Max. operating voltage 300V
Input or output to power: Reinforced insulation
Input to output
Open collector/voltage pulse output: Basic insulation
AC/DC switch output: Reinforced insulation
Approval:
UL/C-UL nonincendive Class I, Division 2,
Groups A, B, C, and D hazardous locations
(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)
UL/C-UL general safety requirements
(UL 61010B-1, CAN/CSA-C22.2 No.1010-1)

EXTERNAL VIEW

FRONT VIEW (with cover open)
Scaling Factor
–1
(A) 10
–2
(B) 10
–3
(C) 10
–4
(D) 10
–n
*
(E) 10
*Settings 7 through 9 are invalid.
No pulse output with these settings.
The front cover cannot be opened to 180 deg.
when flush with neighboring units.
Refer to the instruction manual for detailed procedures.
SEN TRONIC
AG
Produkte, Support und Service
RIGHT SIDE VIEW
Pulse Width Adj.
Pulse Width
Range Selector
Rugghölzli 2
CH - 5453 Busslingen
MODEL: M2PRU
DC
AC Pulse Sensing Type Selector
DC : DC coupling
AC : Capacitor coupling
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com