Basic Call Features - Vogtec Mobex T Series User Manual

Configuring via phone user interface
Account Settings: Press the Menu s oft key when t he phone is idle, select
Advanced Enter p assword ( Default no 123) Accounts to configure the account
Note:
For more information on account parameters, refer to Configuring via web user
interface above.

Basic Call features

Placing a Call
Enter the number in idle, and then press
Direct IP Call
Enter the IP address in idle(star【*】key as the point ), and press
For example:The IP address is 192.168.0.8, enter 192*168*0*8 in idle, and press the
【 】key.
Answering a Call
Press 】key in the incoming call.
Note:You can reject an incoming call by pressing the Reject sot key
Ending a Call Press
【 】key.
Redial
Press【 】key to enter the calls list, press【
desired entry, and then
Call Mute and Un-mute
Press【 】to mute the microphone during a call.
Press【 】again to un-mute the call.
Call Hold and Resume
To place a call on hold:
Press Option soft key to expand the submenu options and select Hold feature during
an active call.
To resume the call, do one of the following:
Press Option soft key to expand the submenu options and select Resume feature
during an active call.
】key.
】.
7 /13
】to select the
】or【
】key.
】key.