Vogtec Mobex T Series User Manual page 13

RF/SAR information
Your phone contains a transmitter and receiver. When powered ON it receives and
transmit low-level radio-frequency (RF). Country governments all over the world
adopt state security guidelines developed by independent scientific organiza-
tions such as ICNIRP and IEEE. These guidelines establish permitted levels of RF
energy for the general population. The guidelines include a substantial safety
margin designed to ensure the safety of all persons, regardless of age and health.
Models
T3
M3
T2
M2
Specific Absorption Rata (SAR) is the units or measurement for absorbed radio
quantity when using mobile devices. SAR lasts are conducted using standard
operating position with the phone transmitting as its highest certified power
level, however, tile actual SAR level of the phone while operating can be well
below tile maximum value. In general, the closer you are to a base station, the
lower the power output or the phone.
The SAR values may vary, depending on different models or phones. To ensure
the safety and health of the users, the phone is designed and manufactured to
meet the radio exposure guidelines.
The device is in compliance with SAR for Uncontrolled Environment /General
Population exposure limits (2.0 W/kg) specified in EN 50360 2017/EN50566
:2017, and had been tested in accordance with the measurement methods and
procedures specified in EN62209-1:2016/ EN 62209-2 2010. The device complies
with RF specifications when the device used at 0.5cm form your body.
Maximum SAR values for testing: 0.368W / kg (Head) , 0.058W/kg (Body).
Bluetooth band MHz
V2.1+EDR, 2400
V2.1+EDR, 2400
V4.0, 2400
V4.0, 2400
12
Network band MHz
NA
WCDMA: 900/2100
GSM: 850/900/1800/1900
NA
LTE: B1/B3/B7/B20
WCDMA: 900/2100
GSM: 850/900/1800/1900