Network Settings; Configuring Your Phone - Vogtec Mobex T Series User Manual

Startup
After the IP phone is inserted the battery, than
automatically begins the initialization process. After startup, the phone is ready
for use. You can configure the phone via phone user interface or web user
interface.

Network Settings:

Press the Menu soft key when the phone is idle, select
the AP you want to connect, and enter an AP password in the user interface,
press[ ]key to connect.
Configuring Your Phone
Configuring via web user interface
Accessing the web user interface:
1.Press the[ ]key when the phone is idle to obtain the IP address of the phone.
2.Open the web browser of your computer, enter the IP address into the address bar
(e.g. "http://192.168.0.100" or "192.168.0.100"), and then press the Enter.
3.Enter the password (Default no password) in the login page and click login.
Account Settings: Click on
Parameters of the account:
Enable Account:
Status:
Enable Register:
Register Server:
Server Port:
Authorization Name:
Password:
User ID:
Display Name:
Label:
Register status icons on the LCD screen:
Note:
Check with your system administrator if any error appears during the registra-
tion process or if a specific configuration is required for your registration.
SIP
You can check/Disabled to enable/disable the account.
It shows the register status of the current account.
You can select Enabled/Disabled to enable/disable the account.
It is provided by ITSP for registration (required).
It is provided by ITSP for registration (required), default is 5060.
It is provided by ITSP for registration (required).
It is provided by ITSP for registration (required).
It is provided by ITSP for registration (required).
It is shown as Caller ID when placing a call.
It is shown on the LCD screen to identify the account.
Resisted
]key startup, it
Register Failed
6 /13
list APs, Select