How To Update Firmware - Pioneer SC-37 Service Manual

5
QQ
Precautions
3 7 63 1515 0
Files are stored in Root of USB memory.
Files are read from Root of USB memory.

To make operations such as moving files, be sure to assign the saved file in Root
of the USB memory.
Also please be careful not to assign *.avr in multiple numbers.
The time and date of updating for saved file is fixed to "2010/01/01 0:00."
In principle, please implement Load without making of factory default settings.
To Load from factory default settings status, please take caution on the following points;
Please be sure to check the HDMI control setting for the user before performing of factory default settings.
Since the HDMI control setting of default settings is ON, turn OFF the HDMI control setting
and Load after performing of factory default settings if the checked user setting is OFF.
(If Load is executed with the setting ON, the assignment information for each HDMI input
will be cleared.)
Procedures for turning OFF the HDMI control setting
HOME MENU 4.System Setup 4e.Other Setup 4e1.HDMI Setup Control OFF

8.2 HOW TO UPDATE FIRMWARE

Workflow
Enter the UPDATE PANEL mode.
Check a current version.
TE
L 13942296513
Update it.
Update completed.
(Turn the power OFF automatically.)
Enter the UPDATE PANEL mode again.
Check an updated version.
Turn the power off.
(Release the UPDATE PANEL mode.)
MAIN com (EMMA), SUB com (EVENT) and DSP Flash ROM Update by USB Memory
and the Confirmation of the Version
UPDATE PANEL Mode (Version update)
[Preparations]
1. Copy the UPDATE FILE to the root directory of the USB Memory.
Note: NEVER copy several UPDATE FILES to the root directory of the USB Memory.
www
Copy only the corresponding UPDATE FILE.
2. Turn off the power to this unit by setting Multi-Zone to "OFF".
3. Connect the USB Memory to the USB terminal (A type) of the front panel.
.
[Procedure]
1. While holding down "TUNE↑" key on the front panel, press "STANDBY ON/OFF" key and
moves to the UPDATE PANEL mode.
2. The updating process is as follows.
5
http://www.xiaoyu163.com
6
x ao u163
y
i
6
http://www.xiaoyu163.com
7
2 9
8
Q Q
3 6 7 1 3 1 5
Updating process
Checking process
co
.
SC-37
7
8
9 4 2 8
0 5 8 2 9 9 4 2 8
m
8
9 9
A
B
C
9 9
D
E
F
91