Pioneer SC-37 Service Manual page 96

1
QQ
3 7 63 1515 0
A
In the Local Area Connections
Properties window, click on OK to
close the window.
B
C
Setting of the static IP address for the PC is completed.
TE
L 13942296513
[Procedures]
1. Either directly connect the PC and AV amplifier (Connection A) or connect them via a DHCP router (Connection B).
[When the PC and AV amplifier are directly connected]
2.
Set the static IP address of the AV amplifier.
How to Set the IP Address
D
(1) Set the remote control to the receiver operation mode, then press HOME MENU.
A Graphical User Interface (GUI) screen appears on the TV.
Use and ENTER to navigate through the screens and select menu items.
Press RETURN to confirm and exit the current menu.
(2) Select 'System Setup' from the Home Menu.
(3) Select 'Network Setup' from the System Setup menu.
(4) Select 'IP Address, Proxy' from the Network Setup menu.
(5) Select the DHCP setting needed.
When selected ON, the network is automatically set up, and it is not necessary to follow Steps 6.
E
Proceed with Step 7.
If there is no DHCP server on the network and you select ON, this receiver will use its own Auto IP function to
determine the IP address.
(6) Enter the IP Address, Subnet Mask, Default Gateway, Primary DNS Server and Secondary DNS Server.
Press  to select a number and  to move the cursor.
(7) Select 'OFF' or 'ON' for the Enable Proxy Server setting to deactivate or activate the proxy server.
www
In case you select 'OFF', proceed with Step 10.
In case selected 'ON', on the other hand, proceed with Step 8.
(8) Enter the address of your proxy server or the domain name.
(9) Enter the port number of your proxy server.
F
Use the numeric buttons to enter the port number.
(10) Select 'OK' to confirm the IP Address/Proxy setup.
96
1
http://www.xiaoyu163.com
2
x ao
y
. i
2
http://www.xiaoyu163.com
3
8
Q Q
3 6 7 1 3
u163
.
SC-37
3
4
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
m
co
4
9 9
2 8 9 9