Firmware Update - Pioneer ELITE VSX-LX505 Instruction Manual

Audio Adjust Dual Mono/Mono
Dolby
DTS/IMAX
Volume
Source Input Volume Absorber
Name Edit
Audio Select
Hardware HDMI
Power Management
12V Trigger A
12V Trigger B
Works with SONOS
Multi Zone Zone 2
Zone 3
Remote Play Zone
Miscellaneous Tuner
Remote ID

Firmware Update

Initial Setup
Lock
Factory Reset
Change the settings of multiplex audio playback.
Change the setting of when Dolby signals are input.
Change the setting of when DTS signals are input.
Change the Volume settings.
Adjust the volume level when there are differences in volume level among multiple devices
connected to this unit.
Set an easy name for each input.
Select the priority for input selection when multiple audio sources are connected to one input
selector.
Change the settings of the HDMI function.
Change the settings for the power-save function.
The 12V TRIGGER OUT A output setting can be set for each input selector.
The 12V TRIGGER OUT B output setting can be set for each input selector.
Change the settings to connect with the Sonos Connect.
Change the settings for Zone 2.
Change the settings for Zone 3.
Change the settings for remote play.
Change the settings for Tuner.
Change the remote controller ID.
Change the settings for Firmware Update.
Make the initial setup from the setup menu.
Lock the Setup menu so that the settings cannot be changed.
All the settings are restored to factory defaults.
Setup
p137
p137
p138
p139
p140
p140
p141
p142
p144
p146
p146
p147
p148
p149
p149
p150
p150
p151
p151
p151
p151
125